The DECserver 90M is a full function asynchronous device and remote access server that provides eight low cost local or remote asynchronous MJ8 (RJ45) connections over 10BASE-T or ThinWire Ethernet LANs. The DECserver 90M supports up to eight session per port and speeds up to 56.2Kbps per port. The DECserver 90M runs DECserver Network Access Software (DNAS) which delivers multi-protocol support for TCP/IP, IPX, and AppleTalk networks.
There were three iterations of the DECserver 90M: DSRVH-M*, -A*, configured without Flash RAM; the DSRVH-N*, -D*, configured with 1 MB of Flash RAM; DSRVH-P*, -R* configured with 2 MB of Flash RAM. All supported expanded multi-protocol connections via LAT, Telnet, SLIP, TN3270, CSLIP and PPP. Also supported were remote-node and remote control applications as well as accounting event logging and audit trails.
Model Number: DSRVH-** Ports: 8 RJ45; 1 BNC; 1 RJ45 LAN
Alternate product: DECserver 90M+
DIGITAL TERMINAL SERVER 2MB
The DCSRV-PA is part of the DECserver 90M+ family and is an 8-port serial device, remote access and terminal server that connects terminals, printers, modems and serial devices over Ethernet LANs. The DCSRV-PA supports up to eight sessions per port and speeds up to 230.4 Kb/s per port. The DCSRV-PA ships with 8MB of internal RAM. 4MB of on-board FLASH RAM is provided with network load host options through a BootP server. Delivering multi-protocol network support, the DCSRV-PA runs DECserver Network Access Software (DNAS).
The Digital MultiStack System unit uses any DEChub 90 module: Ethernet repeater hub, DECserver 90-series*, bridge, router, wireless bridge or RMON in a stackable Ethernet LAN configuration. Up to 16 devices can be connected in a single physical stack, a distributed stack, or in a rack or cabinet configuration.